Part 1 – Equipment Package
The ConcreteScience® equipment platform is both impressive and functional. In addition to serving as its own sales and marketing tool (we designed both the truck-mounted and trailer-mounted service vehicles as driving billboards), the service vehicle is a self-contained mobile extraction cleaning system. Both versions of the vehicle are self-powered and only require water from the job site. All of your supplies and chemical treatments are neatly and safely stored for travel anywhere.

Some of the main highlights include:
• Extraction cleaning system allows you to spray steaming, pressurized water and vacuum extract the water in the same pass leaving the concrete clean, nearly dry and ready for treatment
• Engineered and re-engineered by Prochem and ConcreteScience® based on years of real service experience
• Completely self-contained system only requires water from the job site
• Professional appearing service vehicle is not only comforting to your clients but also serves as its own marketing tool
• Service vehicle shipped ready to operate from day one
• Complete training provided upon delivery
• Hard surface cleaner is easy to operate and minimizes overspray
• Rugged, heavy-duty equipment can handle whatever you can dish out

We have designed two service vehicles – a truck-mounted unit and a trailer-mounted unit. Use the information below to help you start to decide which option is right for your situation.
All of your supplies and chemical treatments are neatly and safely stored for travel anywhere.

Truck-Mounted Unit

• Complete package - commercial grade truck mounted utility box including ConcreteScience® Extraction Cleaning System mounted to franchisee supplied cab and chassis (See recommendation below).
• The best option for concentrated urban areas where a more compact vehicle is easier to navigate

Important Service Vehicle Specifications:
• Dimensions: 15' 9" long inside x 8' wide outside x 85"
high inside and 78" high in rear doorway
• Corners: Round
• Floor: 2" fir wood
• Roof: 1-piece aluminum
• Exterior Siding: Aluminum
• Required Height Clearance: 10'
• Rear Door: Plastic covered overhead door with rust
free package; lock; weather seals
• Side Door: 74" high x 108" wide
• Insulation: 1-5/16" foam insulation in walls and ceiling
• Exterior Lights: ICC clearance lights and reflectors
• Interior Lights: 2 dome lights
• Full Color Vinyl Graphics Package

Recommended Cab and Chassis Specifications:
• Standard Cab-Over Utility Truck
• 40-gallon fuel tank
• Dual Battery, 750 CCA each, Delco 12 volt maintenance free
• Braking System: Anti-Lock, dual circuit hydraulic brake system.
• Engine: 4 and 6 cylinder options avail.
• Front Suspension: 8,440 lbs capacity
• Rear Axle: 14,550 capacity
• Front Axle: 6,830 lbs capacity
• Rear Suspension: 14,550 lbs capacity
• Front GAWR: 6,830 lb ("box" not installed)
• Rear GAWR: 12,980 lb ("box" not installed)
• Total GAWR: 17,950 lb ("box" not installed)
Truck-Mounted Unit

Trailer-Mounted Unit

• Flexible implementation - three quarter ton pickup truck or heavier recommended
• Leave the trailer at the job site freeing up the truck for other service work
• Lower cost start up option

Important Service Trailer Specifications:
• Overall Weight (unloaded): 6800 lbs
• Overall Weight (fully loaded): 10500 lbs
• Required Height Clearance: 8'
• Overall Dimensions: 8 x 16 feet (approx. tongue length 36")
• Model: Continental Cargo CCA8.516TA4
• Frame and Skin: 0.050 Aluminum
• Rear Doors: 9' split
• Side Door: 48" entrance
• Floor: Green treated double plywood
• Rims: Chrome
• Spare Tire: Included
• 2 6000 lb. axles
• Electric Brakes
• Interior Aluminum Diamond Plating
• Full Color Vinyl Graphics Package

Extraction Cleaning System Components (Truck & Trailer Units)

PowerVAC™ Pump
• 48 HP Nissan A-15 Gas Engine assists in created vacuum pressure, water pressure, and pump-out capabilities
• 3500 psi@ 4.5 gpm
• Complete electronic controls
• Sutorbilt Vacuum Pump Vacuum
• CAT 5 CP Waterpump
• Waterflow Rate 4.5 gallons per minute
• Waterpump pressure 3000 psi maximum
• Waste tank capacity 66 gallons each.

Containment Tanks (2)
• Pre-filter tank (66 gal) filters heavy sediment
• Final recovery tank (25 gal before pump out / 45 gal before engine shut down)

Electronic Ignition Heater
• High limit shut down
• Heats water to over 200 degrees F
• Complete electronic controls
• Maximum DTU 480,000

High Profile Vacuum Hose Reel
• Includes 250' of 2" vacuum hose
• Durable powder-coated steel construction

3 Level Hose Reel Rack
• 2 electric powered reels
• 1 300' high pressure hose (5000 operating psi and 750 burst psi)
• 1 200' 3/4" water intake hose (150 psi)
• Manual hose reel w/ 300' sealer hose (solvent resistant)

Safety Equipment
• 2 traffic cones
• Uniforms
• 1 box ear protection
• 2 respirators
• 4 cartridges
• 1 eye wash solution
• Eye wash replacement bottle
• 1 first aid kit / (ANSI) 10 unit
• 2 fire extinguisher
(A, B, C) / Kidde 8.5wt
• Rubber Gloves
• Spill kit (27 gal)
• Dust masks
• Rubber boots

Standard Accessories and Maintenance Kits also included. Contact ConcreteScience® for a complete bill of materials. Note: Specifications are subject to change without notice. Please contact ConcreteScience® with questions and for the most current and detailed specifications.
Trailer-Mounted Unit
 
more info